Posts: 10,286
Threads: 65
Joined: Sep 2014
Reputation:
298
(03-15-2017, 12:31 PM)Coke6pk Wrote: (03-15-2017, 12:27 PM)Canard Wrote: Wait... is that little slipway now two ways?? Like, you could turn off of Edna, almost like you're going down the current off-ramp, and then you'll be driving head-on into traffic flying by on your right at 100 km/h or something?
I am assuming it has to be a one way southbound only... but when looking at the picture, the road near Wellington, it does kinda look like a two way street...
Right. There is a median strip at Wellington, which surely means it's two-way traffic.
Posts: 605
Threads: 0
Joined: Nov 2016
Reputation:
78
03-15-2017, 12:36 PM
(This post was last modified: 03-15-2017, 12:51 PM by KevinT.)
(03-15-2017, 11:28 AM)Markster Wrote: People were talking about on and off-ramps without posting the design in the thread again!
I did link to the original post that included it in my reply... :-)
(03-12-2017, 08:34 AM)KevinT Wrote: (03-11-2017, 07:46 AM)Canard Wrote: If you're on Victoria, heading Eastbound... how do you get on 85 Southbound? It looks like the ramp off of Edna is gone?!
Ish. If you look at the frederick-expresswayclean.pdf linked in this post by JCnb, the Edna-Wellington connector looks to be two way. So I'd say take the ramp from Edna like you always did, but now it will take you north to the intersection at Wellington. Just go through the lights there and bingo, you're on the 85 Southbound ramp.
...K
Posts: 1,101
Threads: 6
Joined: Aug 2014
Reputation:
99
03-15-2017, 12:38 PM
(This post was last modified: 03-15-2017, 12:41 PM by Coke6pk.)
(03-15-2017, 12:33 PM)tomh009 Wrote: (03-15-2017, 12:31 PM)Coke6pk Wrote: I am assuming it has to be a one way southbound only... but when looking at the picture, the road near Wellington, it does kinda look like a two way street...
Right. There is a median strip at Wellington, which surely means it's two-way traffic.
So where is the Northbound traffic coming from? Edna? Because the drawings look to show a one lane roadway at that point.... There doesn't seem to be anywhere else for traffic to come from....
Coke
EDIT : I see the extension of Bruce St seems (in the picture) like one lane too, so I guess they will both be two way...
Posts: 1,095
Threads: 3
Joined: Aug 2015
Reputation:
58
03-15-2017, 01:11 PM
(This post was last modified: 03-15-2017, 01:11 PM by GtwoK.)
Functionally, it makes sense - that same Edna intersection will still be the way on and off of the 85 SB. It's just that instead of going directly to it, it will follow the ~secret tunnel~ to Wellington, and use those ramps
Posts: 2,163
Threads: 17
Joined: Sep 2014
Reputation:
76
Yeah, the secret Edna road is the way to go south on 85. By going north to Wellington.
Posts: 4,407
Threads: 15
Joined: Aug 2014
Reputation:
125
03-15-2017, 02:15 PM
(This post was last modified: 03-15-2017, 02:15 PM by KevinL.)
At least it resolves Canard's navigation query from earlier better than my previous advice, so I appreciate the correction.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
Is it really 2 way? There is no line between lanes coming from Edna...
Posts: 1,101
Threads: 6
Joined: Aug 2014
Reputation:
99
(03-15-2017, 04:08 PM)Canard Wrote: Is it really 2 way? There is no line between lanes coming from Edna...
There are no lines between lanes on Riverbend, Shirley, Bruce or Edna. Unless we are moving to a whole new one way mess in the area, I think they are all 2 way....
Coke
Posts: 4,407
Threads: 15
Joined: Aug 2014
Reputation:
125
The median is clear at Wellington, and there's nothing all the way back to Edna proper that would change the layout.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
Well except that the doted lines dissapear. Which kind of suggests it's a single lane. The median could just be separating left turn/straight/right lanes at Wellington.
WHY IS THERE NOT A PCC WHERE WE CAN ASK ALL THISSSSSSSS
Posts: 2,163
Threads: 17
Joined: Sep 2014
Reputation:
76
The Bruce St extension clearly does not show a line for much of its run. It is still two-way. The Edna connector is two-way.
Posts: 4,407
Threads: 15
Joined: Aug 2014
Reputation:
125
(03-15-2017, 05:02 PM)Canard Wrote: WHY IS THERE NOT A PCC WHERE WE CAN ASK ALL THISSSSSSSS
THe MTO cares not for us mere mortals?
Posts: 4,340
Threads: 1
Joined: May 2015
Reputation:
180
(03-15-2017, 05:38 PM)KevinL Wrote: (03-15-2017, 05:02 PM)Canard Wrote: WHY IS THERE NOT A PCC WHERE WE CAN ASK ALL THISSSSSSSS
THe MTO cares not for us mere mortals?
Why don’t they just post all the design and construction documents on the Web? I don’t think there is anything secret about them. That would also automatically take care of distribution to whatever construction people need them.
Posts: 281
Threads: 0
Joined: Jul 2016
Reputation:
31
No kidding. It drives me crazy that they don't post kor information for projects like this.
Posts: 6,905
Threads: 32
Joined: Oct 2014
Reputation:
224
03-16-2017, 06:21 AM
(This post was last modified: 03-16-2017, 06:27 AM by Canard.)
We're spoiled from the wealth of information available about ion!
All we really need to start is a vectored PDF of Markster's map.
|