12-08-2023, 07:50 PM
Like we were thinking the delay had to do with the airport runways. From the NAVCAN report it says that during construction Runway 26 will be affected "Runway 26 departure climb gradient, must be increased to 270 FT/NM, After the crane is removed the climb gradient will remain and lowered to 220 FT/NM to clear the building". There are also very specific coordinates on where the tower crane can be located on the site due to this. Before the tower crane goes up and comes down VanMar has to submit more documentation for review by NAVCAN.
Maximum tower crane height: 235.135m
Tower crane coordinates: 43 27 8.1036, -80 29 49.9848
Regional Comments
NAVCAN Comments
Maximum tower crane height: 235.135m
Tower crane coordinates: 43 27 8.1036, -80 29 49.9848
Regional Comments
NAVCAN Comments